Standard Cross Braces - Stretcher Bar Warehouse

HEADS UP! ENTER WHICH BRACES CROSS WITH WHICH IN COMMENTS, OTHERWISE, BRACES GO OUT AS IS.
3/4" Cross Braces - STF (Only One Cross Intersection Allowed)
Cross braces will reduce bowing from the pull of canvas on longer bars.
Note: Below 30" stretcher bars do not have slots (mortises) to accept the tab (tenon) on the cross brace.
Below 30" a cross brace is not required.
Important: When ordering cross braces, you use the length the stretcher bars it runs parallel to.
You don't have to measure inside dimensions, we've already taken that into consideration.
If you chose to couple the intersection of crossing bars, use a 5/8" Truss screw as in the photo.
Example: If you had a 40"x20" stretcher bar frame and you decided to place a cross brace midway between the 40" bars, you would choose a 20" cross brace. It's that simple.
Important: If your braces need to cross, we must know which ones cross! So, be sure to list your request in the comments box at checkout.
Cross braces are sold in units of one, not in pairs.

Stretcher bars

Info